current location: Home >

Decoloring Flocculant GH810

Active ingredients: ≥50%
PH Value: 2-5
Solubility: Soluble with water at any rate
Specific Gravity at 25℃: 1.3
Viscosity: 30-1000


Product Introduction:
This kind of typical decolorizing flocculant is a kind of quaternary cationic polymer which is the special product for decoloring, flocculating, COD decreasing and other applications. Mainly used for colored wastewater.


1. Diluted with 10-40 times water, then dosing into wastewater, after being mixed for serval minutes, it can be precipitated.
2. Dosage is based on water quality, please do range finding to confirm the dosage advance.
3. Adjust the PH value to 6-9 for better results.
4. It can be used with PAC, but not mixed together. In this way, the treatment cost can be lowered. Whether poly aluminum chloride is used previous or afterwards depends on the flocculation test and the treatment process.
5. Storage: store in dry and ventilate place, the storage life is 1 year. Please refer Technical Data Sheet and Label for more details.


It can be used for dyeing wastewater, textile wastewater, pigment wastewater, ink wastewater, papermaking wastewater, coking wastewater, tannery wastewater and food processing wastewater and other industries color removal.